Live center with bearings, hardned and ground body and shaft, lubrificated with permanently grease.
Recommended for lathes with axial compensation 2mm and VDI attack for turret
Attacco/ Connector/ Anschluss | Kg | RPM | TOLL ≤ | Ø B (mm) | L (mm) | L1 (mm) |
|---|---|---|---|---|---|---|
VDI 30 | 2.0 | 5500 | 0.005 | 61 | 55 | 79 |
VDI 40 | 3.7 | 4500 | 0.005 | 80 | 63 | 89 |
Example of live centre CM 5 mod. GT-V at 1.000 rpm: Axial load (Fa)= 546 (daN)
Example of live centre CM 5 mod. GT-V at 1.000 rpm: Axial load (Fa)= 546 (daN)
mm | daN |
|---|---|
0,2 | 69,4 |
0,4 | 138,8 |
0,6 | 208,2 |
0,8 | 277,6 |
1,0 | 347 |
1,2 | 416,4 |
1,4 | 485,8 |
1,6 | 555,2 |
1,8 | 624,6 |
2,0 | 694 |
mm | daN |
|---|---|
0,2 | 82,6 |
0,4 | 165,2 |
0,6 | 247,8 |
0,8 | 330,4 |
1,0 | 413 |
1,2 | 495,6 |
1,4 | 578,2 |
1,6 | 660,8 |
1,8 | 743,4 |
2,0 | 826 |
Sprung live centre with interchangeable tip
Codice / Code / Id.-Nr. | Attacco / Connector / Anschluss | Modello punta | Ø A mm | L 2 mm |
|---|---|---|---|---|
802177 | VDI 30 | 803040 | 29 | 40 |
802187 | VDI 40 | 803050 | 35 | 47 |
2mm sprung live centre with extended point.
Codice / Code / Id.-Nr. | Attacco / Connector / Anschluss | Ø A mm | Ø C mm | L 2 mm |
|---|---|---|---|---|
802176 | VDI 30 | 29 | 8 | 51 |
802186 | VDI 40 | 38 | 12 | 56 |
