Live center with bearings, hardned and ground body and shaft, lubrificated with permanently grease.
Recommended for lathes with Axial compensation 2mm and Morse tapper attack
Attacco/ Connector/ Anschluss | Kg | RPM | TOLL ≤ | a (mm) | Ø B (mm) | L (mm) | L1 (mm) |
|---|---|---|---|---|---|---|---|
CM4 | 2.3 | 5500 | 0.005 | 6.5 | 61 | 109 | 79 |
CM5 | 4.6 | 5500 | 0.005 | 6.5 | 80 | 136 | 89 |
Example of live centre CM 5 mod. GT-V at 1.000 rpm: Axial load (Fa)= 546 (daN)
Example of live centre CM 5 mod. GT-V at 1.000 rpm: Radial load (Fr)= 320 (daN) – Fr x 2 = PIECE WEIGHT
mm | daN |
|---|---|
0,2 | 69,4 |
0,4 | 138,8 |
0,6 | 208,2 |
0,8 | 277,6 |
1,0 | 347 |
1,2 | 416,4 |
1,4 | 485,8 |
1,6 | 555,2 |
1,8 | 624,6 |
2,0 | 694 |
mm | daN |
|---|---|
0,2 | 82,6 |
0,4 | 165,2 |
0,6 | 247,8 |
0,8 | 330,4 |
1,0 | 413 |
1,2 | 495,6 |
1,4 | 578,2 |
1,6 | 660,8 |
1,8 | 743,4 |
2,0 | 826 |
Sprung live centre with interchangeable tip
Codice / Code / Id.-Nr. | Attacco / Connector / Anschluss | Modello punta | Ø A mm | L 2 mm |
|---|---|---|---|---|
846197 | CM4 | 803040 | 29 | 40 |
856197 | CM5 | 803050 | 35 | 47 |
Sprung live centre with extended point
Codice / Code / Id.-Nr. | Attacco / Connector / Anschluss | Ø A mm | Ø C mm | L 2 mm |
|---|---|---|---|---|
846196 | CM4 | 29 | 8 | 51 |
856196 | CM5 | 38 | 12 | 56 |
